AVSECUSOFT

STAGE 1

Audi A6 C6 (2008)

Engine: 2.0 TDI, Diesel

Gearbox: manual transmission

Stock: 136 HP / 320 Nm

Estimated gain:+39 HP / +75 Nm

Performance verified:Dragy Pro measurement

Results
Power
136 HP≈ 175 HP

+39 HP

Torque
320 Nm≈ 395 Nm

+75 Nm

0–100 km/h
13,64 s11,74 s

1.9 s faster

Project video

Result proof

Dragy Pro measurement • 0–100 km/h

1.9 s faster

Measurements were taken on the same road section. Direction and conditions are comparable.

Client goal

The owner wanted stronger in-gear response and a more confident build-up of speed.

Work done

We carried out initial diagnostics and logged engine operating parameters on the road, then prepared a Stage 1 ECU calibration. We checked the acceleration change with a before-and-after Dragy comparison.

Result

Estimated Stage 1 output is approximately 175 HP and approximately 395 Nm. Dragy recorded 0–100 km/h in 11.74 s after the tune, compared with 13.64 s before — a 1.90 s improvement.

Case details

An Audi A6 built for covering miles benefits from a useful reserve of pulling power. The owner of this 2.0 TDI wanted better in-gear response and stronger acceleration, which set the direction for Stage 1. Torque increased from the stock 320 Nm to approximately 395 Nm, while the Dragy comparison showed a 1.90-second improvement to 100 km/h. Extra pulling power and quicker acceleration give this upgrade a practical role on both everyday routes and longer journeys.

Want a similar result for your car?

Similar projects